Basic Welding – How Long Does It Take To Learn Welding?

welding basics

Hi,

I’m  Garrett Strong with MakeMoneyWelding.com.

I’ve been helping beginners & hobbyists learn to weld online for several years now. I’ve helped thousands of people just like you get started learning to mig weld with my beginners guide to welding.

If you’re looking for basic welding advice or you’re just curious how long it takes to learn welding then sit back, grab a cup of coffee, and keep on reading for some eye opening information.

I want to share with you how YOU can start welding quickly & easily. Did I mention it would be QUICK & EASY!

Most beginners who want to learn to weld online find it very helpful to have a video instructor, just like in a real life classroom setting.

So, How Long Does It Take To Learn Basic Welding?

You’re probably going to be disappointed at my answer, because like everything that all depends on how much time and effort you put into learning how to weld.

I know, you wanted an exact time frame… hobart handler

But, since I might have left you hanging with my response to the question “how long does it take to learn welding”, I’m going to give you a little golden nugget that could save you tons of time.

Here is the BIG secret that will put you ahead of all the rest of those beginners out there that are struggling to make good welds…

Forget about all the different welding processes out there that are probably confusing you, and stick with the one welding process that will get you welding the fastest and easiest. MIG Welding.

Start Your Basic Welding Training With A MIG Welder

This one tip is so important for you to understand when you’re just getting started.

I want to guide you in the right direction here, so forget about stick welding or TIG welding for the moment.

The reason I highly recommend you to get started with a MIG welder is because you can take it right out of the box and lay a clean and solid weld bead right away.

You can’t expect your basic welding techniques to be great the first time, but at least you can start using it right away.

Later in this post I’m going to reveal some mig welding basics, mig welding tips, and mig welding techniques to help you get started.

First, let me explain why you should stay away from Stick welding and TIG welding if you’re a complete beginner who wants to do hobby welding.

basic welding 1For DIY welding, many people don’t have the correct electrical outlets installed to run a stick welder or TIG welder because many of those machines run on 220 volt outlets.

Don’t get me wrong, TIG welding and Stick welding will do a great job with basic welding projects… it’s just the learning curve is much higher for beginners.

Like I said before, learning to weld can take you a long time, or a short time. It all depends on how much you practice.

Just buying a nice welder won’t do the trick for you. You’ve got to dedicate some time, although it’s not a whole lot of time when using a MIG welder, but it’s necessary to practice.

mig buyers guideIf you’re a beginner struggling to pick your first welder you may want to download my free MIG buyers guide to give you some quick & easy advice to get started.

Click the “Like” button below to download my free report now!

3 Reasons Why I Don’t Recommend Basic Welding With A Stick Welder For Beginners

  1. It can be difficult to start an arc: When you start an arc with a stick welder it’s like lighting a match, and the guy stick weldingwelding rod can be jumping around everywhere that you don’t want it to be.
  2. It can be difficult to see the weld puddle: When you’re just starting out you will want a process where you can see what’s going on where the are meets the metal. It’s all about controlling the heat.
  3. It creates slag: Basic welding with a stick welder creates a slag coating that must be chipped away after the weld is layed down. MIG welding is just a much quicker process and it doesn’t produce slag.

I recommend you to stay away from stick welding just because it’s more difficult to pick up for beginners.

TIG Welding Is Not A Basic Welding Process

You don’t have to think hard about why I don’t recommend TIG welding as a beginners process. Usually, beginners course welding instructors will save TIG welding for the last semester because it’s advanced.

TIG welding is much more involved and takes a lot longer than MIG welding. Plus, it’s just not the best place to start out welding with.

Here’s 3 Reasons I Don’t Recommend TIG Welding For Beginners

  1. It’s slow: TIG welding produces the most beautiful welds of all the welding processes, but it’s slow and cumbersome.
  2. It take both hands, and 1 foot: When you TIG weld you have to hold the torch with one hand, dip the rod with the other hand, and control the voltage with a foot pedal. Not beginner friendly!
  3. They are expensive: TIG welders cost the most out of all the welding processes. Most beginners aren’t looking to pay what some of the TIG machines on the market cost.

You can see that it is definitely not a basic welding process, so my recommendation is to stay away from TIG until you’ve mastered MIG.

One process I haven’t mentioned yet it oxy acetylene welding. Now the oxy acetylene setup is the most versatile setup out of oxy acetylene weldingall the welding processes because you can cut, weld, braze, and bend using it.

This is a great process for beginners to learn as well because it teaches you heat control and how to manipulate the weld puddle. However, the process is extremely slow and that why it’s been replaced with arc welding processes.

So, the next best thing for beginners is the MIG welder.

Learning how to mig weld is fun, and easy. You can open your welder, put the welding wire in, and be welding right out of the box. Best of all, there are many MIG machines that hook right up to your 110 volt outlet.

No worrying about shocking yourself trying to change out your outlets.

Plus, MIG welds are extremely smooth and it hardly takes any effort to make a weld that looks like a veteran did it.

mig tutorial 2

Here’s 3 Reasons Why I Think MIG Welding Is The Best Basic Welding Process For Beginners

  1. You can weld for a long time without stopping: Unlike using welding rods or filler rods that burn down, with a mig welder you put the roll of wire into the machine and you’re good to go.
  2. It doesn’t create slag: No slag means no beating with a hammer, and no smoke. You can lay a smooth weld bead down and be done with it.
  3. It’s simple to use: When mig welding you simply put the gun to the metal and pull the trigger. The arc start and you’re welding, which makes it super easy for any newbie to use.

So, now that I’ve shared with you why I think basic welding skills should begin with a mig welder, I want to share with you my FREE basic welding video course, Intro To MIG welding.

You can click the link or sign up below. Inside I’ll show you how to pick a mig welder, machine setup, laying perfect welds, and welding your first project.

Happy Welding,

Garrett Strong

Opt In Image
The #1 FREE Beginners Welding Course Designed To Get You Started From Home!
Weld and Create Projects That Will SHOCK Your Friends & Family!
  • The secret to weld like a pro
  • How to make BREATH-TAKING welds
  • How to build KILLER projects!
  • Plus, A LOT More...

About Garrett S.


Hi there! My name is Garrett Strong and I've been helping complete beginners learn how to weld online for several years, and I can quickly and easily teach you the welding tips and tricks you need to know. To get started simply sign up for my FREE Beginners Report and Video Course!

Tags: , , , , , , , , , , , , , , , , , , ,

Like me on Facebook



HTML Online Editor Sample

Letter from Garrett Strong

sidebar letter pic

Hey Garrett Strong here. You are probably wondering, who is this guy, and how can he help me be successful at learning to weld from home?

The truth is, I'm just a normal guy like you, who decided that I wanted to be able to weld projects that will knock the socks off people and maybe even make a little cash doing it.

So I made it my mission to read every welding book I could, watch every welding video available, and teach my self all the techniques the pros use... and I did it even though I was a complete beginner.

After 5 years of trial and error and thousands of mistakes made, I can truly say I can weld any project I put my mind to and impress my friends & family with my projects.

And now I want to teach you everything I learned, and spare you all the time spent making bone-headed mistakes I made in order to learn how to hobby weld.

You can start your hobby welding training today! That's right, by signing up for my Beginners Welding Tips Newsletter you'll also get instant access to my intro to welding training right away.

So what are you waiting for?

sign up now

Wordpress SEO Plugin by SEOPressor